1、工作服上极难清洗的霉斑

1. Mold stains on work clothes that are extremely difficult to clean

应使用35-60摄氏度的热双氧水溶液或者漂白粉溶液擦拭，再用水漂洗干净。这样可以让你工作服上面原本难以的霉斑得以，让你的工作服还原原来的状态。

It should be wiped with a hot hydrogen peroxide solution or bleach solution at 35-60 degrees Celsius, and then rinsed clean with water. This can remove the mold on your work clothes that were previously difficult to remove, restoring your work clothes to their original state.

2、棉麻织品上的霉斑

2. Mold stains on cotton and linen fabrics

先用氨水20克兑1升水的稀释液浸渍，然后用水漂洗干净。这种霉斑的方式相对比较简单，但是，一定要在稀释液的比例上把握好，不然则可能达不到你想要去除霉斑的效果。

First, soak in a diluent of 20 grams of ammonia water mixed with 1 liter of water, and then rinse thoroughly with water. This method of removing mold spots is relatively simple, but it is important to control the proportion of diluent, otherwise it may not achieve the desired effect of removing mold spots.

3、丝毛织品上的霉斑

3. Mold spots on silk and wool fabrics

应使用棉球蘸松节油擦洗，再用太阳晒，去除潮气。这种方式可以说是非常简单的了，不过，建议大家一定要注意合理的晾晒工作服。

Cotton balls dipped in turpentine should be used to scrub, and then sun dried to remove moisture. This method can be said to be very simple, but it is recommended that everyone pay attention to reasonable drying of work clothes.

更多的关于济南工作服的问题或者详细的内容，请进入我们公司的网站： 网站中会有很多的内容仅供参考。

For more questions or detailed information about Jinan work uniforms, please visit our company website: There will be a lot of content on the website for reference only.